Sidebar
elements:jet2d
Table of Contents
JET2D
Plane or axisymmetric state
Description
For the axisymmetric state, the symmetry axis is Y.
If plane stress state: the element only accepts a thicknesss THICK=1 (default value) → Use forces per thickness unit F/e to solve the problem.
Element type: 30
Implemented by: S. Cescotto (1988)
Files
Prepro: JET2DA.F
Lagamine: JET2DB.F
Input file
| Title (A5) | |
|---|---|
| TITLE | “JET2D” in columns 1 to 5 |
| Control data (2I5) | |
| NELEM | Number of elements |
| INDPP | 0 → No specific weight (or volumic mass if NTANA = -1) 1 → Specific weight taken into account (or volumic mass is NTANA = -1) |
| ILAW | 0 → if the used material laws are those adapted only to JET2D elements 1 → if the material law is a conventional 2D material law (for example, ARB2E, ARB2A, etc…) |
| Only if INDPP = 1 (3G10.0) | |
| WSPE(1) | Specific weight in X direction |
| WSPE(2) | Specific weight in Y direction |
| WSPE(3) | Density |
| Definition of the elements (2I5/4I5) | |
| LMATE | Material law |
| NCRIT | 0 → No remeshing 1 → Remeshing criterion |
| NODES(4) | List of nodes |
elements/jet2d.txt · Last modified: 2020/08/25 15:46 (external edit)
