This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
laws:epplasol [2023/11/20 15:42] sophie [Real parameters] |
laws:epplasol [2023/11/21 13:12] (current) sophie [Real parameters] |
||
---|---|---|---|
Line 107: | Line 107: | ||
|IECPS| = 0 : $\psi$ is defined with PSIC and PSIE| | |IECPS| = 0 : $\psi$ is defined with PSIC and PSIE| | ||
|:::| = 1 : $\psi$ is defined with PHMPS| | |:::| = 1 : $\psi$ is defined with PHMPS| | ||
- | |:::| = 2 : Variable dilatancy (Thesis El Moustapha 2014)| | + | |:::| = 2 : Variable dilatancy (El Moustapha,2014) ((El Moustapha, K. (2014) ‘Identification of an enriched constitutive law for geomaterials in the presence of a strain localisation’, Thesis, Liège University.))| |
- | |:::| = 3 : Variable dilatancy (Thesis Salehnia 2015)| | + | |:::| = 3 : Variable dilatancy (Salehnia, 2015)((Salehnia, F. (2015) From some obscurity to clarity in Boom clay behavior: Analysis of its coupled hydro-mechanical response in the presence of strain localization. Thesis, Liège University.))| |
|KMETH| = 2 : actualised VGRAD integration| | |KMETH| = 2 : actualised VGRAD integration| | ||
|:::| = 3 : Mean VGRAD integration (Default value) | | |:::| = 3 : Mean VGRAD integration (Default value) | | ||
Line 124: | Line 124: | ||
|:::| 2 : concrete hydration via .hydr file | | |:::| 2 : concrete hydration via .hydr file | | ||
==== Real parameters ==== | ==== Real parameters ==== | ||
- | ^ Line 1 (7G10.0) ^^ | + | ^ Line 1 (8G10.0) ^^ |
|E| YOUNG’s elastic modulus | | |E| YOUNG’s elastic modulus | | ||
|ANU| Poisson ratio | | |ANU| Poisson ratio | | ||
Line 149: | Line 149: | ||
|AK2|Capillary cohesion second parameter | | |AK2|Capillary cohesion second parameter | | ||
|DECCOH| Cohesion hardening shifting | | |DECCOH| Cohesion hardening shifting | | ||
- | ^ Line 4 - Only If IECPS = 2 Or If IECPS = 3 (7G10.0) ^^ | + | ^ Line 4 - Only If IECPS = 2 Or IECPS = 3 (7G10.0) ^^ |
|PSICPEAK| Peak of dilatancy angle for compressive paths (If IECPS=2 then PSICPEAK is the initial value of dilatancy angle| | |PSICPEAK| Peak of dilatancy angle for compressive paths (If IECPS=2 then PSICPEAK is the initial value of dilatancy angle| | ||
|PSICLIM| Limit value of dilatancy angle for compressive paths| | |PSICLIM| Limit value of dilatancy angle for compressive paths| | ||
Line 157: | Line 157: | ||
|PSIELIM| Limit value of dilatancy angle for extensive paths| | |PSIELIM| Limit value of dilatancy angle for extensive paths| | ||
|DECPSI| Value of EEQU when the dilatancy angle has been half decreased between its initial and final values| | |DECPSI| Value of EEQU when the dilatancy angle has been half decreased between its initial and final values| | ||
- | ^ Line 4 - Only if IDAM = 1 AND IECPS = 0 or IECPS =1 (2G10.0) \\ Or Line 5 - Only If IDAM = 1 AND If IECPS = 2 or If IECPS = 3 (2G10.0) ^^ | + | ^ Line 4 - Only if IDAM = 1 AND (IECPS = 0 or IECPS =1) (2G10.0) \\ Or Line 5 - Only If IDAM = 1 AND (IECPS = 2 or IECPS = 3) (2G10.0) ^^ |
|P| Parameter controlling the damage evolution rate | | |P| Parameter controlling the damage evolution rate | | ||
|YD0| Initial threshold | | |YD0| Initial threshold | | ||
- | ^ Line 4 - Only if IDAM = 2 AND IECPS = 0 or IECPS =1 (5G10.0) \\ Or Line 5 - Only If IDAM = 2 AND If IECPS = 2 or If IECPS = 3 (5G10.0) ^^ | + | ^ Line 4 - Only if IDAM = 2 AND (IECPS = 0 or IECPS =1) (5G10.0) \\ Or Line 5 - Only If IDAM = 2 AND (IECPS = 2 or IECPS = 3)(5G10.0) ^^ |
|__Note__: The evolution of the hydratation degree must be specified in file *.hydr such that: \\ TIMES \\ (I10) number of time steps defined below \\ (2G10.0, repeated) Time step, alpha|| | |__Note__: The evolution of the hydratation degree must be specified in file *.hydr such that: \\ TIMES \\ (I10) number of time steps defined below \\ (2G10.0, repeated) Time step, alpha|| | ||
|FCF| Final simple compression resistance | | |FCF| Final simple compression resistance | |